What a fence costs in Green Bay
Every yard is different, but here's an honest look at what drives fence pricing in Northeast Wisconsin — and real project ranges to set expectations.
A fence in Green Bay costs $18 to $65 per linear foot installed: chain link $18–$30, wood privacy, aluminum and pool fencing $35–$55, vinyl $45–$65. That covers the fence on steel posts driven below the frost line, the permit and the utility locates. Gates and old-fence removal are priced on site. 150 feet of wood privacy fence runs $5,250–$8,250.
Installed price per foot
| Style | Heights | Typical installed cost |
|---|---|---|
| Wood Privacy | 4–8 ft | $35–$55 per ft installed |
| Vinyl / PVC | 4–6 ft | $45–$65 per ft installed |
| Chain Link | 3–12 ft | $18–$30 per ft installed |
| Aluminum | 3–6 ft | $35–$55 per ft installed |
| Pool Fencing | 48 in+ | $35–$55 per ft installed |
These are the same ranges the fence cost calculator multiplies by your footage. It sizes the run from your lot if you don't know the feet, and draws the fence by style, height and color.
What the per-foot price covers
The per-foot range is the installed price: the fence itself on 2-3/8″ galvanized steel posts driven below the frost line, with the municipal fence permit and the Diggers Hotline (811) utility locates handled.
Not in the range: gates, old-fence removal, rock, roots and tough access. Those are priced at the free on-site measure, because no calculator can see your yard. Taller panels land toward the top of the range.
- Warranty
- 3-year workmanship warrantyIn writing, on every fence.
- Install lead time
- Booking 2–3 weeks outFrom a signed quote to install day.
- On site
- Most yards done in 1–2 daysEvery post is driven, so there is no concrete cure wait.
Your yard, your number
This page is the price sheet. The calculator applies it to your footage, or sizes the footage from your lot, and shows the installed range before it asks for a name.
The math, worked four ways
Per-foot range times footage, rounded to the nearest $50. That is all the arithmetic there is, and it is the same arithmetic the calculator does. These are the fence alone, before gates and any old-fence removal.
Same run, different material: 150 ft of wood privacy fence is $5,250–$8,250, and the same 150 ft in vinyl is $6,750–$9,750. Taller panels land toward the top of a range.
Real-world ranges
~120 ft of 6 ft vinyl privacy, one walk gate
~150 ft of 6 ft cedar privacy, two gates
~250 ft of 4 ft black chain link, walk + drive gate
Each sample is a whole project: the fence at the height shown, plus the gates named on the card. The per-foot table and the calculator price the fence alone, which is why a sample reads higher than its footage times the per-foot range. Gates are quoted at the free on-site measure, and your written quote lists them as their own lines.
Six things that move the number
Chain link is the most budget-friendly; vinyl and cedar cost more up front but pay back in low maintenance.
More fence and taller panels mean more material and labor. Most yards land between 120–250 ft.
Each gate adds hardware and labor. Walk gates are modest; wide drive gates cost more.
Slopes, rock, tree roots, and tight access all add time to the build.
Tearing out and hauling away an existing fence is a line item we'll quote separately.
We include the municipal permit and 811 utility locates in every project.
Want the full breakdown? Read our Green Bay fence cost guide →
Cash price or monthly
Monthly payment plans are available on approved credit, and the written quote shows the cash price and the monthly option side by side. The financing page has a payment calculator and how it works.
Fence cost questions
How much does a fence cost in Green Bay?
$18 to $65 per linear foot installed, depending on the style: Wood Privacy $35–$55, Vinyl / PVC $45–$65, Chain Link $18–$30, Aluminum $35–$55, Pool Fencing $35–$55. Multiply the range by your footage for a ballpark; the free written quote after an on-site measure is the firm number.
How much does 150 feet of privacy fence cost?
About $5,250–$8,250 for 150 feet of wood privacy fence at $35–$55 per foot installed, before gates and any old-fence removal. The same 150 feet in vinyl comes to $6,750–$9,750.
What is included in the price per foot?
The per-foot range is the installed price: the fence itself on 2-3/8″ galvanized steel posts driven below the frost line, with the municipal fence permit and the Diggers Hotline (811) utility locates handled. Not in the range: gates, old-fence removal, rock, roots and tough access. Those are priced at the free on-site measure, because no calculator can see your yard. Taller panels land toward the top of the range.
Why are the sample projects higher than the per-foot math?
Each sample is a whole project, with the gates named on its card. The per-foot ranges and the calculator price the fence alone, and gates are quoted at the on-site measure, so a sample with one or two gates reads higher than its footage times the per-foot range.
Is the warranty included, and how soon can you install?
Every fence carries a 3-year workmanship warranty, in writing. Installs are booking 2–3 weeks out from a signed quote. Most yards are done in 1–2 days. Every post is driven, so there is no concrete cure wait.
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get an exact price for your yard
Sample ranges only go so far. A free on-site estimate gives you a firm, itemized number — no guessing.