(920) 888-8958|Serving Green Bay & Northeast Wisconsin|Contact
Licensed & Insured
Kodiak Built LLC
Price it in 30 seconds
Most Popular

Vinyl / PVC Fences in Green Bay

Never paint, stain, or seal again. Heavy-gauge vinyl that shrugs off the elements.

Vinyl is the install-it-and-forget-it option. Our panels are heavy-gauge, UV-stabilized, and aluminum-reinforced where it counts — so they stay bright and straight for decades with nothing more than a hose-down.

Vinyl / PVC fence installed in Green Bay, WI
The short answer

A vinyl fence in Green Bay runs $45–$65 per foot installed. Heavy-gauge vinyl gives full privacy with no painting, staining or sealing, and lasts 25–30 years. Every fence rides on 2-3/8″ galvanized steel posts driven below the frost line and carries a 3-year workmanship warranty.

By Rob Diederich, owner · Updated
Warranty
3-year workmanship warrantyIn writing, on every fence.
Install lead time
Booking 2–3 weeks outFrom a signed quote to install day.
On site
Most yards done in 1⁠–⁠2 daysEvery post is driven, so there is no concrete cure wait.
Overview

Vinyl / PVC fencing in Green Bay & Northeast Wisconsin

Vinyl (PVC) fencing is the lowest-maintenance privacy option we install — no painting, staining, or sealing, ever. For busy Green Bay homeowners who’d rather enjoy the yard than maintain the fence around it, it’s tough to beat. Panels come in privacy, semi-privacy, and picket profiles and in white, tan, gray, and woodgrain finishes to suit any home.

Not all vinyl is equal. Big-box panels are thin and turn brittle in the cold. We install heavy-gauge, UV-stabilized vinyl with aluminum-reinforced bottom rails and gates, all riding on 2-3/8″ galvanized steel posts driven below the frost line — so it stays bright, straight, and rattle-free through Wisconsin winters.

What You Get

Features & options

Heavy-gauge, UV-stabilized vinyl
Privacy, semi-privacy & picket styles
Won’t rot, peel, splinter, or fade
Aluminum-reinforced bottom rails & gates
Colors: white, tan, gray & woodgrain
Backed by manufacturer lifetime-grade warranties
Materials
Virgin PVC (not regrind)
Aluminum-reinforced rails
Best For
Hands-off homeowners
Pool & patio privacy
Clean, modern curb appeal
Instant estimate

Price your vinyl fence in 30 seconds

Our published installed prices × your footage. No name needed to see the number.

1.Fence style
ft

Most Green Bay yards take 120–250 ft. Count the lines you want fenced, not the whole lot.

Your ballpark
$45–$65 per ft

Add your footage and the installed range appears here.

  • 2-3/8″ steel posts driven below the frost line
  • Permit and Diggers Hotline (811) locates handled
  • Free on-site measure and a written, itemized quote

Gates, old-fence removal, rock and roots are priced on site. Taller panels land toward the top of the range.

Make it a real number

Leave your name and mobile. We set up a free measure and your written quote follows within one business day of it.

No spam, no sharing. Rather give every detail? Free Quote has the full form.

Vinyl / PVC fence project 1 in Green Bay, WIVinyl / PVC fence project 2 in Green Bay, WIVinyl / PVC fence project 3 in Green Bay, WI
How We Build It

The Vinyl / PVC install process

Every Kodiak install follows the same Wisconsin-tested playbook — permits and Diggers Hotline locates handled, steel posts driven below the frost line, and a walkthrough when we're done.

How Kodiak builds a vinyl privacy fence, in 5 stepsOne yard, built step by step: Estimate & color selection; Permits & Diggers Hotline locates; Reinforced posts driven below the frost line; Panel & rail assembly; Gates, walkthrough & cleanup. A cutaway under the grass shows the located utility lines, the frost line, and the galvanized steel posts driven past it with no holes and no concrete.
Gate hung, walkthrough done
Frost line42″+811 locates markedGate here
  1. Estimate & color selection

    We measure, help you choose a profile and color, mark gate locations, and send a clear written quote.

  2. Permits & Diggers Hotline locates

    We pull your municipal fence permit and call 811 for utility locates before we drive a post — handled for you across the Green Bay area.

  3. Reinforced posts driven below the frost line

    We drive 2-3/8″ galvanized steel posts below the frost line and sleeve the vinyl posts over them — strength a big-box kit can’t match.

  4. Panel & rail assembly

    Routed rails lock into the posts and pickets slide in tight: a clean, hidden-fastener system that won’t rattle, sag, or show hardware.

  5. Gates, walkthrough & cleanup

    We hang and tune the gates, walk the finished fence with you, clear the site, and back it with our 3-year workmanship warranty.

Tap a step to see it
Built For Wisconsin

Why it holds up here

Green Bay winters are hard on fences. Here's what we engineer around so yours isn't leaning by spring.

Cold-weather brittleness

Bargain vinyl cracks in deep cold. Heavy-gauge, UV-stabilized panels stay impact-tough at Wisconsin winter temps.

Frost heave

Steel-reinforced posts driven below the frost line keep panels from lifting and gapping over the winter.

UV & fade

Built-in UV inhibitors keep whites from yellowing and colors from fading through years of summer sun.

Kodiak: steel, driven below frostNo footing for frost to grab; the post can't heave or rot
Wood post, set shallowLifts with each freeze, settles crooked each thaw
Steel post driven below the frost line next to a shallow wood post that heavesA ground cross-section in four stages. Left: a post driver pushes a galvanized steel post through the topsoil and past the frost line, about 42 to 48 inches down in Northeast Wisconsin, to 42 inches or more; there is no hole and no concrete footing. Right: a wood post in a concrete collar set above the frost line. In winter the ground freezes from the top down, ice lenses form, the collar is gripped and lifted, the wood post tilts and its fence section racks, while the steel post does not move. After the spring thaw the wood post stays leaning over a gap under its collar and the steel post is still plumb.
Spring thaw
12″24″36″Frost line about 42–48″ down42–48″42″+deepConcrete collarFrozen, expanding soilGap left under the collar Still plumb Lifted and leaning
  1. Kodiak: a steel post, driven

    A hydraulic post driver pushes a 2-3/8″ galvanized steel post 42″ or more into undisturbed soil, below the frost line. No hole, no concrete, no cure time.

  2. The usual way: a wood post, set shallow

    A wood post in a concrete collar, set above the frost line. On install day it looks every bit as straight.

  3. Winter: the ground freezes from the top down

    Water in the soil freezes, expands and pushes up on anything it has hold of. A wide collar is the easiest grip there is: the shallow post lifts and its fence racks. The steel post is held by solid ground below the frost.

  4. Spring thaw: one post is still plumb

    The shallow post never quite settles back. It leans over a gap under the collar and climbs again next winter. The driven steel post is exactly where it was put.

Illustration, not to scale above ground
Every Vinyl / PVC fence we build rides on steel driven below the frost line. That, more than the panels, is why it is still straight in ten winters.
Caring for your Vinyl / PVC fence
Rinse with a garden hose as needed
Soap and water clears scuffs and marks
Never needs paint, stain, or sealer
Check gate hinges and latches once a year
4.9 average · 8+ local reviews
Read all reviews →
Steel posts, below frost

2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.

Permit & 811 handled

We pull the municipal permit and call Diggers Hotline on every job.

Written, itemized quotes

A free on-site measure, a firm number, no surprise add-ons later.

Owner-run in Green Bay

You deal with the people who build it, start to walkthrough.

Good To Know

Vinyl / PVC questions

Does vinyl fence get brittle in the cold?

Cheap vinyl can. That’s why we install heavy-gauge, UV-stabilized panels with aluminum-reinforced bottom rails — not thin big-box stock. It handles Wisconsin freeze-thaw without cracking or sagging.

Is vinyl worth more than wood?

Up front it’s usually a bit more, but you never pay to stain, seal, or replace rotted boards — so over 15–20 years vinyl often costs less to own. We’ll show both numbers at your quote.

How do I maintain it?

A garden hose, and occasional soap and water for scuffs. No painting, staining, or sealing — ever. That’s the whole point of vinyl.

Do you need a permit for vinyl fencing?

Yes — same as any fence in the Green Bay area. We pull the permit and handle the 811 utility locates for you.

What colors and styles are available?

White, tan, gray, and woodgrain finishes, in full-privacy, semi-privacy, and picket profiles.

Find your town

Vinyl Fences by town

Local conditions, permits and questions for vinyl fences in every town we serve across Northeast Wisconsin.

Explore other styles

Wood Privacy4–8 ft tallChain Link3–12 ft tallAluminum3–6 ft tallPool Fencing48 in+ tall

Ready for a fence built to outlast the winters?

Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.

Free QuoteCall (920) 888-8958