Yes, we build and hang fence gates in Kimberly: walk gates sized for a mower, 10- to 12-foot double drive gates, cantilever gates and ornamental aluminum driveway gates, plus automatic swing and slide operators with keypads and remotes. Gate posts are heavier and driven deeper, below the frost line, because a gate sags when its post moves. We can often automate a gate you already have if it's square and the posts are solid. Kimberly is about 35 minutes southwest of our Green Bay shop.
- Walk gates
- About 4 ft wide
- Drive gates
- 10–12 ft double
- Openers
- Swing & slide operators
- Gate posts
- Larger, deeper, below frost
Gates & Openers in Kimberly
Swing direction in a narrow gap
A Kimberly side-yard gate often opens between the house and the neighbor's driveway, so which way it swings matters. We usually hang it to swing into your yard, clear of the neighbor's side and the spot where shoveled snow lands, and size it about 4 feet wide so the mower and the trash carts go through without a fight.
A gate between neighbors' yards
On Kimberly's close-set blocks, neighbors with kids the same age sometimes want a way between yards that doesn't mean walking around by the street. A walk gate built into the shared fence line does it, with a latch on the side that suits both households, hung on its own larger gate post so it doesn't pull the fence out of line.
One wide gate for the big project
Many compact Kimberly back yards have no driveway access at all, which becomes a problem the day a shed, a pool or a landscaping crew needs to get in. A 10- to 12-foot double gate, with a drop rod holding one leaf solid day to day, opens the yard for equipment without taking down a fence section.
Gates that still latch in February
The post, not the gate
A gate is a lever hanging off its post. Frost heave or a shallow post lets it lean until the latch stops lining up — so our gate posts are heavier and driven deeper, below the frost line.
No ground track to freeze
For wide chain link openings, a cantilever gate slides clear without a track at grade that snow and ice can jam.
Cold-weather operators
Operators, hinges and latches specced for below-zero mornings — an automatic gate that freezes shut in January is worse than no operator at all.
Every gate job in Kimberly starts with a free written quote, so you have a firm number before any work starts. Everything about gates & openers →
More fence services in Kimberly
Gates & Openers: common questions
Can you add a gate to my existing fence in Kimberly?
Usually, yes. In Kimberly we cut the opening into the existing run and set new gate posts larger and deeper than the line posts, driven below the frost line, so the new gate doesn't sag. We build the gate to match the fence as closely as possible, in wood, vinyl, chain link or aluminum.
Do you install automatic gate openers in Kimberly?
Yes. We install swing and slide operators in Kimberly with keypads, remotes or an intercom, specced for below-zero mornings. An existing gate can often be automated if it's square and its posts are solid; if a post has moved, we reset it first, because an operator can't make up for a leaning post.
Why does my Kimberly gate stop latching every winter?
Almost always because the gate post moves, not the gate. A gate is a lever hanging off its post, and frost in Kimberly's ground can lift a shallow post enough that the latch misses by spring. Setting the gate post larger and deeper, driven below the 42- to 48-inch frost line, stops it.
Gates & Openers nearby: Appleton · Kaukauna · Little Chute · Neenah · Menasha
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free gate quote in Kimberly, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.