Yes, we install vinyl fences in Bellevue: heavy-gauge, UV-stabilized PVC in privacy, semi-privacy and picket profiles, in white, tan, gray or woodgrain, 4 to 6 feet tall. The vinyl sleeves over 2-3/8″ galvanized steel posts driven below the frost line, so it stays straight and won't crack in a January cold snap. Most projects run $45–$65 per foot installed, about $6,750–$9,750 for a typical 150-foot backyard, and it never needs paint or stain. Bellevue is about 10 minutes east of our Green Bay shop.
- Posts
- Steel-reinforced, below frost
- Heights
- 4–6 ft
- Colors
- White, tan, gray, woodgrain
- Price
- $45–$65 per ft
Vinyl Fences in Bellevue
Sprinkler lines under new sod
Many new Bellevue yards have irrigation that went in with the sod, and Diggers Hotline doesn't mark private sprinkler lines. We call 811 for the utilities, then walk the fence line with you to flag heads and valve boxes before we drive a post, so the fence goes in without a broken zone or a trench of torn-up lawn to fix afterward.
Subdivision covenants and colors
Some Bellevue subdivisions carry their own rules on fence style, height or color, separate from the village's. Vinyl makes those easy to meet, because white, tan, gray and woodgrain all come in privacy, semi-privacy and picket profiles. Bring us the covenant page and we'll spec a fence that satisfies it before you submit anything.
Retiring old wood near Allouez
On the established streets near the Allouez border, plenty of Bellevue fences are on their third stain job and starting to lean. Replacing one with vinyl ends the staining for good. We pull the old fence, posts and all, haul it away, and sleeve the new vinyl over steel posts driven below the frost line.
Semi-privacy on an open, windy lot
A solid privacy panel catches wind like a sail, and much of Bellevue's newer housing sits on open ground. A semi-privacy profile is the middle ground: it screens the view while letting some air through, which lowers the wind pressure on the fence. Vinyl comes in privacy, semi-privacy and picket, so the choice doesn't change the material or the color.
Full privacy still works on an exposed lot when post depth, spacing and gate placement are planned for the wind. The best fence options for wind and snow compares the styles.
Why our vinyl survives Wisconsin winters
Cold-weather brittleness
Bargain vinyl cracks in deep cold. Heavy-gauge, UV-stabilized panels stay impact-tough at Wisconsin winter temps.
Frost heave
Steel-reinforced posts driven below the frost line keep panels from lifting and gapping over the winter.
UV & fade
Built-in UV inhibitors keep whites from yellowing and colors from fading through years of summer sun.
Most vinyl fences in Bellevue run $45–$65 per foot installed; length, height, gates and old-fence removal move the number. See the fence cost guide or monthly financing. Everything about vinyl fences →
Price a vinyl fence in Bellevue
Our published installed prices × your footage. No name needed to see the number.
Most Green Bay yards take 120–250 ft. Count the lines you want fenced, not the whole lot.
Add your footage and the installed range appears here.
- 2-3/8″ steel posts driven below the frost line
- Permit and Diggers Hotline (811) locates handled
- Free on-site measure and a written, itemized quote
Gates, old-fence removal, rock and roots are priced on site. Taller panels land toward the top of the range.
More fence services in Bellevue
Vinyl Fences: common questions
Will a vinyl fence install tear up my new Bellevue lawn?
It shouldn't. On new Bellevue yards we flag sprinkler heads and lines with you, call Diggers Hotline (811) for buried utilities, and drive the posts straight in at their marked spots, so the disturbance is a few inches of turf at each post rather than a trench along the whole line.
Can vinyl meet my Bellevue subdivision's fence rules?
Usually, yes. Vinyl comes in white, tan, gray and woodgrain, in privacy, semi-privacy and picket profiles from 4 to 6 feet, which covers what most Bellevue covenants ask for. Bring us the covenant page and we'll spec a fence that satisfies both the subdivision and the village.
Can you replace an old wood fence with vinyl in Bellevue?
Yes. On Bellevue's older streets we remove the old wood fence, posts and all, haul it away, and drive new 2-3/8″ galvanized steel posts below the frost line with the vinyl sleeved over them. The vinyl never needs the staining the old fence did.
Vinyl Fences nearby: Green Bay · De Pere · Allouez · Ashwaubenon · Howard · Suamico · Ledgeview · Hobart · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free vinyl fence quote in Bellevue, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.
