Yes, we build pool fences in Bellevue to Wisconsin barrier code: at least 48 inches tall with self-closing, self-latching gates, in powder-coated aluminum or tensioned safety mesh that keeps the pool in view. Posts are driven below the frost line so the gates keep latching every season. Most projects run $35–$55 per foot installed. We pull the permit, call Diggers Hotline (811) and leave you inspection-ready. Bellevue is about 10 minutes east of our Green Bay shop.
- Height
- 48″+ barrier
- Gates
- Self-closing, self-latching
- Material
- Aluminum or safety mesh
- Price
- $35–$55 per ft
Pool Fences in Bellevue
One fence for the yard and pool
When a new Bellevue yard has no fence yet, the perimeter fence can be built as the pool barrier from the start: 48″+ tall, no climbable gaps, and every gate into the yard self-closing and self-latching. That saves building a second fence inside the first, and it keeps the whole back yard open around the pool.
Removable mesh for young families
Bellevue's newer neighborhoods have a lot of young families, and many want a barrier that keeps toddlers out without fencing the pool off from the patio for good. Tensioned removable mesh meets the 48-inch requirement with a self-closing, self-latching gate, keeps the water in full view, and can come down once the kids are older.
Unfenced yards on every side
In a Bellevue subdivision that's still filling in, few neighboring yards are fenced, so kids move freely from lot to lot and a pool can be reached from any direction. The barrier has to close every side, including the one facing an empty lot, and every gate has to swing shut and latch on its own.
Permit, covenant and locates before the pool opens
A Bellevue pool fence can need two approvals. The Village of Bellevue issues the permit, and if the subdivision has an HOA, its covenant governs style, color and placement separately. One doesn't replace the other. We pull the village permit; bring us the covenant page and we'll spec the barrier to clear both.
Utility locates have their own clock: Wisconsin requires the Diggers Hotline request at least three business days ahead, and weekends and legal holidays don't count. Diggers Hotline doesn't mark private lines such as sprinklers or pool equipment lines, so tell us where those run. See call before you dig and the pool fence inspection checklist.
Built to pass — and keep passing
Barrier code
Wisconsin requires a 48″+ barrier with self-closing, self-latching gates. We build to pass the first inspection.
Freeze-thaw & frost
Posts driven below the frost line keep gates aligned and self-latching through every season.
Water & chemicals
Powder-coated aluminum and coated hardware shrug off splash, snowmelt, and pool chemistry without rusting.
Most pool fences in Bellevue run $35–$55 per foot installed; length, height, gates and old-fence removal move the number. See the fence cost guide or monthly financing. Everything about pool fences →
Price a pool fencing in Bellevue
Our published installed prices × your footage. No name needed to see the number.
Most Green Bay yards take 120–250 ft. Count the lines you want fenced, not the whole lot.
Add your footage and the installed range appears here.
- 2-3/8″ steel posts driven below the frost line
- Permit and Diggers Hotline (811) locates handled
- Free on-site measure and a written, itemized quote
Gates, old-fence removal, rock and roots are priced on site. Taller panels land toward the top of the range.
More fence services in Bellevue
Pool Fences: common questions
Does a pool fence in Bellevue need an inspection?
Most do. Pool barriers in Bellevue go through the Village of Bellevue permit process, and an inspector typically checks the height, the gaps and the self-closing, self-latching gates. We pull the permit, call Diggers Hotline (811), and build to Wisconsin's 48-inch barrier code.
When should I plan the fence for a new pool in Bellevue?
As soon as the pool is contracted. Planning the barrier with the pool lets us set posts in Bellevue yards before pavers and plantings go in and work around the pool builder's schedule, so the 48-inch barrier and self-latching gates can go up as the pool is finished.
Does my Bellevue pool fence need to be 48 inches on every side?
Yes. The barrier has to be at least 48 inches tall everywhere it encloses the pool, including any side facing an unfenced or unbuilt lot in Bellevue. Every gate in it must be self-closing and self-latching, and posts driven below the frost line keep those latches aligned.
Pool Fences nearby: Green Bay · De Pere · Allouez · Ashwaubenon · Howard · Suamico · Ledgeview · Hobart · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free pool fence quote in Bellevue, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.
