(920) 888-8958|Serving Green Bay & Northeast Wisconsin|Contact
Licensed & Insured
Kodiak Built LLC
Price it in 30 seconds
Brown County · Built to Wisconsin barrier code

Pool Fences in Howard, WI

Pool barriers for Howard back yards — 48″+ powder-coated aluminum or tensioned safety mesh with self-closing, self-latching gates, timed around new pool construction and built to be inspection-ready the day the pool is filled.

Pool Fences by Kodiak Built
The short answer

Yes, we build pool fences in Howard to Wisconsin barrier code: at least 48 inches tall with self-closing, self-latching gates, in powder-coated aluminum or tensioned safety mesh that keeps the pool in view. Posts are driven below the frost line so the gates keep latching every season. Most projects run $35–$55 per foot installed. We pull the permit, call Diggers Hotline (811) and leave you inspection-ready. Howard is about 15 minutes northwest of our Green Bay shop.

By Rob Diederich, owner · Updated
Height
48″+ barrier
Gates
Self-closing, self-latching
Material
Aluminum or safety mesh
Price
$35–$55 per ft
Local to Howard

Pool Fences in Howard

Pool and fence in the same season

In Howard, a pool often goes in a year or two after the house, while the lawn is still young. We coordinate with your pool builder so posts go in after excavation and before final grading and sod. That keeps heavy equipment off the new barrier and avoids tearing up a finished yard to set it.

Ground that's been moved twice

On a newer Howard lot, the soil around a fresh pool has been moved twice — once by the developer and once by the pool crew — and it keeps settling. A gate post that tips even slightly stops the latch from catching. Ours are driven 42″ or deeper, below the frost line, so the self-closing gate keeps latching.

Watching the pool from the patio door

Newer Howard homes often put the patio door and deck right on the back yard, so the barrier sits in your main view. Aluminum pickets or tensioned mesh keep the water visible from the kitchen, and we place the self-closing gate where your family actually walks from the deck to the pool.

Built to pass — and keep passing

Barrier code

Wisconsin requires a 48″+ barrier with self-closing, self-latching gates. We build to pass the first inspection.

Freeze-thaw & frost

Posts driven below the frost line keep gates aligned and self-latching through every season.

Water & chemicals

Powder-coated aluminum and coated hardware shrug off splash, snowmelt, and pool chemistry without rusting.

Most pool fences in Howard run $35–$55 per foot installed; length, height, gates and old-fence removal move the number. See the fence cost guide or monthly financing. Everything about pool fences →

Instant estimate

Price a pool fencing in Howard

Our published installed prices × your footage. No name needed to see the number.

1.Fence style
ft

Most Green Bay yards take 120–250 ft. Count the lines you want fenced, not the whole lot.

Your ballpark
$35–$55 per ft

Add your footage and the installed range appears here.

  • 2-3/8″ steel posts driven below the frost line
  • Permit and Diggers Hotline (811) locates handled
  • Free on-site measure and a written, itemized quote

Gates, old-fence removal, rock and roots are priced on site. Taller panels land toward the top of the range.

Make it a real number

Leave your name and mobile. We set up a free measure and your written quote follows within one business day of it.

No spam, no sharing. Rather give every detail? Free Quote has the full form.

More fence services in Howard

Fence installation in Howard Wood Privacy Fences in Howard Vinyl Fences in Howard Chain Link Fences in Howard Aluminum Fences in Howard Fence Repair in Howard Gates & Openers in Howard
Howard questions

Pool Fences: common questions

Do I need a permit for a pool fence in Howard?

Yes. A pool barrier in Howard needs a Village of Howard permit, and on newer lots the recorded easements behind the pool can limit where the barrier may run. We pull the permit, check the easements, call Diggers Hotline (811), and build to Wisconsin code — 48 inches minimum with self-closing, self-latching gates.

When should the fence go in for a new pool in Howard?

After the pool is excavated and backfilled, and before final grading and sod. That order keeps equipment away from the barrier and the new lawn. If your Howard yard is already finished, we install around the landscaping instead, and the barrier is still ready for inspection when the pool is.

Can a Howard pool fence be removable mesh?

Yes. Tensioned removable mesh suits Howard families with young kids: installed, it's a 48-inch barrier with self-closing, self-latching gates that you can see straight through, and it comes out when you no longer need it. Powder-coated aluminum is the permanent option that never has to be moved.

Pool Fences nearby: Green Bay · De Pere · Bellevue · Allouez · Ashwaubenon · Suamico · Ledgeview · Hobart · Pulaski

4.9 average · 8+ local reviews
Read all reviews →
Steel posts, below frost

2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.

Permit & 811 handled

We pull the municipal permit and call Diggers Hotline on every job.

Written, itemized quotes

A free on-site measure, a firm number, no surprise add-ons later.

Owner-run in Green Bay

You deal with the people who build it, start to walkthrough.

Get a free pool fence quote in Howard, WI

Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.

Free QuoteCall (920) 888-8958