Yes, we repair fences in Hobart, including ones we didn't build: heaved and leaning posts, rotted wood posts, sagging or dragging gates, storm and plow damage, and loose chain link. Failed posts get reset on 2-3/8″ galvanized steel posts driven below the frost line, so the problem doesn't come back. Every repair gets a free written quote that tells you honestly whether repair or replacement is the smarter spend. Hobart is about 15 minutes west of our Green Bay shop.
- Quote
- Free & written
- Fences
- Wood, vinyl, chain link
- Fixes
- Posts, gates, storm damage
- Posts
- Reset on steel, below frost
Fence Repair in Hobart
One bad stretch of a long run
On a long Hobart fence, failure usually starts in one stretch — a wet low spot, a windy corner, a few shallow posts — not across the whole line. There's no reason to replace 600 feet for 60 feet of trouble. We reset the failed posts on 2-3/8″ galvanized steel below the frost line, re-tension or re-hang that section, and leave the sound fence alone.
Privacy sections racked by wind
Solid privacy panels on Hobart's open lots take the full force of every storm, and a section that racks or blows down usually means posts that were too far apart or too shallow for the exposure. We straighten or replace the panels, tighten the post spacing on that stretch, and put the damage in a written quote you can submit to insurance.
Mower and tractor strikes
Bigger Hobart lots get mowed with bigger machines, and fence corners, gate posts and the first line post off each corner take the hits. We replace bent posts, rails and mesh, and where the same spot keeps getting clipped, we can reinforce it or adjust the layout so the mowing path clears the fence.
What we fix most
Heaved & leaning posts
Frost heave pushes shallow posts up and out of line. We reset or replace them on 2-3/8″ galvanized steel, driven below the frost line, so it doesn't happen again.
Sagging & dragging gates
Gates that rub, drag, or won't latch usually mean a moving gate post or worn hardware. We re-set posts, re-hang gates, and replace hinges and latches.
Wind, storm & plow damage
Blown-down panels, snapped rails, limb strikes and plow hits. We match materials as closely as possible and get the line closed back up fast.
Every fence repair job in Hobart starts with a free written quote, so you have a firm number before any work starts. Everything about fence repair →
More fence services in Hobart
Fence Repair: common questions
Can you repair just one section of a long Hobart fence?
Yes. On long Hobart runs, damage is usually concentrated in one stretch, and we repair only what failed: resetting posts on 2-3/8″ galvanized steel below the frost line, re-tensioning chain link, or replacing panels. If the whole line is failing, the free written quote says so plainly.
A storm racked my privacy fence in Hobart — can it be straightened?
Often, yes. If the posts are sound, panels can be straightened or replaced; if the posts moved, they get reset. On exposed Hobart lots we tighten the post spacing on the damaged stretch, and our written quote documents the damage for insurance.
Can you fix fence posts hit by a mower or tractor in Hobart?
Yes. Bent or snapped posts, crushed rails and torn mesh from mower and tractor strikes are standard repairs on Hobart properties. We replace the damaged parts, drive new posts below the frost line, and can reinforce the corners that get hit every season.
Fence Repair nearby: Green Bay · De Pere · Bellevue · Allouez · Ashwaubenon · Howard · Suamico · Ledgeview · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free fence repair quote in Hobart, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.
