Yes, we build and hang fence gates in Hobart: walk gates sized for a mower, 10- to 12-foot double drive gates, cantilever gates and ornamental aluminum driveway gates, plus automatic swing and slide operators with keypads and remotes. Gate posts are heavier and driven deeper, below the frost line, because a gate sags when its post moves. We can often automate a gate you already have if it's square and the posts are solid. Hobart is about 15 minutes west of our Green Bay shop.
- Walk gates
- About 4 ft wide
- Drive gates
- 10–12 ft double
- Openers
- Swing & slide operators
- Gate posts
- Larger, deeper, below frost
Gates & Openers in Hobart
Wide enough for the equipment
On a Hobart acreage lot, the drive gate has to pass a riding mower, a compact tractor, a utility trailer and maybe a camper. A 10- to 12-foot double drive gate clears them with room to spare, and a drop rod holds one leaf solid for everyday walking. Gate posts go in larger and deeper, below the frost line.
Cantilever gates on chain link perimeters
For wide openings in a Hobart chain link perimeter, a cantilever gate slides clear of the opening without a ground track that snow and ice can jam. It also doesn't need swing room, which matters when the gate opens toward a ditch, a slope or a parked trailer. A slide operator can automate it later.
Gates along a long run
A fence that runs several hundred feet with one gate means a long walk every time you need the other side. On bigger Hobart lots we place walk gates about 4 feet wide where you'll actually cross — toward the garden, the shed, the back field — and drive each gate post below the frost line so it keeps latching.
Gates that still latch in February
The post, not the gate
A gate is a lever hanging off its post. Frost heave or a shallow post lets it lean until the latch stops lining up — so our gate posts are heavier and driven deeper, below the frost line.
No ground track to freeze
For wide chain link openings, a cantilever gate slides clear without a track at grade that snow and ice can jam.
Cold-weather operators
Operators, hinges and latches specced for below-zero mornings — an automatic gate that freezes shut in January is worse than no operator at all.
Every gate job in Hobart starts with a free written quote, so you have a firm number before any work starts. Everything about gates & openers →
More fence services in Hobart
Gates & Openers: common questions
How wide should a gate be for a tractor or trailer in Hobart?
For tractors, trailers or a camper, a 10- to 12-foot double drive gate is the width that never gets regretted. On Hobart properties with larger equipment, wider openings can be handled with a cantilever gate. Walk gates run about 4 feet, enough for a mower without turning it sideways.
Is a cantilever gate a good fit for a Hobart chain link perimeter?
Often, yes. A cantilever gate slides clear of the opening with no ground track for snow and ice to jam, and it needs no swing room. On Hobart perimeters with wide openings it's a common choice, and a slide operator with a keypad or remotes can be added.
How many gates does a long fence need in Hobart?
As many as the places you'll regularly cross. On long Hobart runs, that's usually a drive gate for equipment plus walk gates toward the garden, shed or back field. Every gate post is heavier and driven deeper, below the frost line, because a gate sags when its post moves.
Gates & Openers nearby: Green Bay · De Pere · Bellevue · Allouez · Ashwaubenon · Howard · Suamico · Ledgeview · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free gate quote in Hobart, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.