Yes, we repair fences in Howard, including ones we didn't build: heaved and leaning posts, rotted wood posts, sagging or dragging gates, storm and plow damage, and loose chain link. Failed posts get reset on 2-3/8″ galvanized steel posts driven below the frost line, so the problem doesn't come back. Every repair gets a free written quote that tells you honestly whether repair or replacement is the smarter spend. Howard is about 15 minutes northwest of our Green Bay shop.
- Quote
- Free & written
- Fences
- Wood, vinyl, chain link
- Fixes
- Posts, gates, storm damage
- Posts
- Reset on steel, below frost
Fence Repair in Howard
Posts on ground that settled
Howard's newer lots sit on soil the developer moved, and it keeps settling for years. A fence set in that ground on shallow posts can drop, lean or lift one section at a time. We reset the failed posts on 2-3/8″ galvanized steel driven below the frost line, so they stop moving every time the yard does.
Matching vinyl in newer subdivisions
Vinyl is everywhere in Howard's newer subdivisions, so a lot of our repair work there is a single cracked or blown-out panel. Profiles and colors vary between manufacturers, so we identify yours and match it as closely as we can — and tell you up front if a matching section isn't available before you approve the quote.
Fences built fast during the boom
With so many Howard homes built in a short span, plenty of fences went in quickly on posts set too shallow for a Northeast Wisconsin frost depth of 42–48″. Those are the runs that heave first. We tell you honestly whether a few resets will hold or whether the whole line is failing and replacement is the smarter spend.
What we fix most
Heaved & leaning posts
Frost heave pushes shallow posts up and out of line. We reset or replace them on 2-3/8″ galvanized steel, driven below the frost line, so it doesn't happen again.
Sagging & dragging gates
Gates that rub, drag, or won't latch usually mean a moving gate post or worn hardware. We re-set posts, re-hang gates, and replace hinges and latches.
Wind, storm & plow damage
Blown-down panels, snapped rails, limb strikes and plow hits. We match materials as closely as possible and get the line closed back up fast.
Every fence repair job in Howard starts with a free written quote, so you have a firm number before any work starts. Everything about fence repair →
More fence services in Howard
Fence Repair: common questions
Why is my newer Howard fence already leaning?
Usually because the posts are shallow, wood, or both, and set in settling new-construction soil. Frost in the Howard area reaches about 42–48 inches, so posts set above it get pushed around every winter. We reset failed posts on 2-3/8″ galvanized steel driven below the frost line, which stops the cycle.
Can you match a cracked vinyl panel on a Howard fence?
Usually closely. We identify the profile, height and color — white, tan, gray or woodgrain — and replace the damaged panel or section with the nearest available match. If the original profile on your Howard fence has been discontinued, the free written quote says so before any work starts.
Is it worth repairing a fence in Howard, or should I replace it?
Repair makes sense when the damage is limited to a few posts, a gate or a panel. When posts are failing across the whole line, as on many Howard fences set shallow during the building boom, replacing section by section costs more than doing it once. The free written quote makes that call in writing.
Fence Repair nearby: Green Bay · De Pere · Bellevue · Allouez · Ashwaubenon · Suamico · Ledgeview · Hobart · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free fence repair quote in Howard, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.
