Yes, we build and hang fence gates in Allouez: walk gates sized for a mower, 10- to 12-foot double drive gates, cantilever gates and ornamental aluminum driveway gates, plus automatic swing and slide operators with keypads and remotes. Gate posts are heavier and driven deeper, below the frost line, because a gate sags when its post moves. We can often automate a gate you already have if it's square and the posts are solid. Allouez is about 10 minutes south of our Green Bay shop.
- Walk gates
- About 4 ft wide
- Drive gates
- 10–12 ft double
- Openers
- Swing & slide operators
- Gate posts
- Larger, deeper, below frost
Gates & Openers in Allouez
Setting back from Riverside Drive
On a home facing Riverside Drive, a driveway gate right at the road means waiting in traffic while it opens. We look at setting the gate far enough up the driveway that your car pulls completely off the road first, and an automatic operator with a remote shortens the wait even more.
A new gate in an old fence
Plenty of Allouez fences are still solid while the gate has sagged, rotted or simply never latched right. We can replace just the gate and its posts, setting new gate posts larger and deeper driven below the frost line, and build the new leaf to match the old fence as closely as the materials allow.
Automating an older gate
An older Allouez driveway gate can often take an opener, but only if it's square, swings true and hangs on solid posts. If the posts have moved over the years, we reset them first, because an operator can't make up for a lean. Then a swing operator with keypads or remotes goes on.
Gates that still latch in February
The post, not the gate
A gate is a lever hanging off its post. Frost heave or a shallow post lets it lean until the latch stops lining up — so our gate posts are heavier and driven deeper, below the frost line.
No ground track to freeze
For wide chain link openings, a cantilever gate slides clear without a track at grade that snow and ice can jam.
Cold-weather operators
Operators, hinges and latches specced for below-zero mornings — an automatic gate that freezes shut in January is worse than no operator at all.
Every gate job in Allouez starts with a free written quote, so you have a firm number before any work starts. Everything about gates & openers →
More fence services in Allouez
Gates & Openers: common questions
How far back should a driveway gate sit on Riverside Drive in Allouez?
Far enough that your vehicle pulls fully off Riverside Drive before the gate opens, plus room for a trailer if you tow one. We measure the driveway at the free Allouez estimate, then set the gate position and swing direction to fit the length you actually have.
Can you put a new gate in my old Allouez fence?
Yes. If the fence is sound, we can replace just the gate and its posts on an Allouez lot, setting the new gate posts larger and deeper driven below the frost line. Walk gates usually run about 4 feet so a mower fits through.
Can my old Allouez driveway gate be automated?
Often, yes, if the gate is square, swings true and its posts are solid. Many older Allouez gates need a post reset first, since an operator can't compensate for a lean. Swing and slide operators come with keypads, remotes or intercoms.
Gates & Openers nearby: Green Bay · De Pere · Bellevue · Ashwaubenon · Howard · Suamico · Ledgeview · Hobart · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free gate quote in Allouez, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.