Yes, we build and hang fence gates in Howard: walk gates sized for a mower, 10- to 12-foot double drive gates, cantilever gates and ornamental aluminum driveway gates, plus automatic swing and slide operators with keypads and remotes. Gate posts are heavier and driven deeper, below the frost line, because a gate sags when its post moves. We can often automate a gate you already have if it's square and the posts are solid. Howard is about 15 minutes northwest of our Green Bay shop.
- Walk gates
- About 4 ft wide
- Drive gates
- 10–12 ft double
- Openers
- Swing & slide operators
- Gate posts
- Larger, deeper, below frost
Gates & Openers in Howard
Room for the projects still coming
New Howard homeowners usually have a list: a shed next summer, a pool after that, a load of landscape rock for the beds. Each one needs a wide way into the back yard. A 10- to 12-foot double drive gate built now saves cutting the fence open later, and a drop rod holds one leaf shut for everyday walking.
Place the gate before the path
On a bare new Howard lot, the gate location decides where the patio path, the mower route and the kids' shortcut end up. We walk the yard with you and set a walk gate about 4 feet wide where traffic will naturally flow — often off the garage service door or the deck stairs — before landscaping locks the route in.
Square now, automatic later
Plenty of Howard homeowners want a drive gate today and an opener someday. An operator can usually be added to an existing gate if it's square and its posts are solid, so we build drive gates on larger, deeper posts driven below the frost line. When you're ready, a swing operator with a keypad and remotes can go on.
Gates that still latch in February
The post, not the gate
A gate is a lever hanging off its post. Frost heave or a shallow post lets it lean until the latch stops lining up — so our gate posts are heavier and driven deeper, below the frost line.
No ground track to freeze
For wide chain link openings, a cantilever gate slides clear without a track at grade that snow and ice can jam.
Cold-weather operators
Operators, hinges and latches specced for below-zero mornings — an automatic gate that freezes shut in January is worse than no operator at all.
Every gate job in Howard starts with a free written quote, so you have a firm number before any work starts. Everything about gates & openers →
More fence services in Howard
Gates & Openers: common questions
How wide should a gate be for a future shed or pool in Howard?
For anything that needs equipment — a pool excavation, a shed delivery or a skid steer — a 10- to 12-foot double drive gate is the safe width. Walk gates run about 4 feet, wide enough for a mower without turning it sideways. Building the wide gate into a new Howard fence avoids cutting one in later.
Can I add an automatic opener to my Howard gate later?
Usually, if the gate is square, the posts are solid and the swing is true. Swing operators suit leaf gates and slide operators suit cantilever gates, and both work with keypads, remotes and intercoms. If a Howard gate post has moved, we reset it first, because an operator can't compensate for a leaning post.
Where should the walk gate go on a new Howard lot?
Wherever you'll walk most: commonly beside the garage service door, near the deck stairs, or on the side that leads to the trash bins. On a new Howard lot the gate also has to clear any easement or drainage swale along the line, so we confirm both on the free site visit before marking it.
Gates & Openers nearby: Green Bay · De Pere · Bellevue · Allouez · Ashwaubenon · Suamico · Ledgeview · Hobart · Pulaski
2-3/8″ galvanized posts driven below the frost line, so nothing rots or heaves.
We pull the municipal permit and call Diggers Hotline on every job.
A free on-site measure, a firm number, no surprise add-ons later.
You deal with the people who build it, start to walkthrough.
Get a free gate quote in Howard, WI
Free on-site estimates across Green Bay & Northeast Wisconsin. No pressure, just a clear written quote.